![]() Use your PC and SD card reader to unzip the appropriate CHDK distribution file for your camera model and firmware version into the main root directory of your SD card. If the camera does not want to format your card, it is probably already formatted. This should happen automatically when you put a new card in the camera. Start with an SD card formatted by your camera.Steps to use the firmware update method are : It tricks the camera into thinking it is doing a firmware update but actually causes CHDK to be loaded into RAM. Note that this method does not actually update the camera's firmware.It is the easiest way to load CHDK but must be done each time the camera is powered on, because CHDK does not make any permanent changes to the camera when it runs. It uses the camera's built-in "Firmware Update." menu item to load CHDK from a file called either "PS.FIR" or "PS.FI2" (depending on the camera model). The Firmware Update Method allows you to load CHDK from any SD card formatted to work in your camera. Load the CHDK distribution to your SD card.Configure your SD memory card using the most appropriate method listed below.Decide what CHDK loading method you want to use.Download the complete release of the correct version of CHDK for your camera's firmware from CHDK Download Page.Determine the firmware version of your camera using firmware version information from the CHDK FAQ.Determine what year your camera was released using the Camera Platform ID Table wiki page. ![]() Prior to starting to use CHDK, you will need to: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |